Kupa Dipfinity Dipping System Starter Kit

KUPA's DipFinity LED/UV Adhesive Step # 3 provides superior adhesion to the nail plate while providing complete color coverage to the nail once dipped in your choice of TripTych colored powders. Out with the old way of dipping with cyanoacrylate and in with the new LED/UV Adhesive from KUPA! A nail dip system you and your clients are sure to love!

For use after Step #1 DipFinity Dehydrator & Step # 2 DipFinity Primer use DipFinity LED/UV Adhesive Step # 3 with any TripTych Colored Powders.

Kit includes:

DipFinity Dehydrator #1 - Essential for a long-lasting bond. Apply DipFinity Dehydrator nail prep to the natural nail plate to deep clean pH balance and temporarily dehydrate. Designed to gently lift out moisture, oil and contaminants. Use DipFinity Dehydrator #1 before DipFinity Primer #2 is applied to enhance retention and extend life.

DipFinity Primer #2 - Creates union between nail & DipFinity product. DipFinity Primer #2 is strong but gentle, a superior bonding agent that works without the harsh acids that can burn or irritate cuticles and skin. Apply one coat to create a strong loving bond between nail keratin and DipFinity extension product

DipFinity LED/UV Adhesive Step #3 - Apply a thin even coat of adhesive to the nail, dip in the TripTych colored powder of your choice.  Apply another thin layer of adhesive, dip in the TripTych colored powder for a second coat.  Cure for 1 minute in LED lamp or 2 minutes in UV lamp.  Finish with DipFinity TopGloss Step # 4. 

DipFinity LED/UV Top Gloss Step #4 - Soak-off Gel TopCoat completes the DipFinity system with step#4.  DipFinity LED/UV Step #4 finishes to a high gloss shine that will not fade, chip or peel. Cures to a no-wipe finish.

Cures 90 seconds in your KUPA MANIPro Glo UV/LED Light or 2 minutes in a standard UV Light.

To Remove: Soak in acetone until soft then gently remove with a metal pusher.

Included in the DipFinity Starter Kit are 2 TripTych Colored Powders in full 1oz sizes!